Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4001

Page 2
background image

When removing, make sure that surface of cylinder is not damaged. 

Installing

-

The surface of the piston and seal must only be cleaned with mineral spirits and then dried.

-

Thinly coat piston and seal with assembly paste ( G 052 150 A2) before installing.

-

Install seal into the brake caliper.

-

Insert the protective cap - A - into the disk (T 10146/6) - 1 -.

-

Press the protective cap with the disk (T 10146/6 ) - 1 - and the piston resetting tool (T 10145) - 2 - into the brake caliper so that it contacts the
brake caliper all around.

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4001

[PREV PAGE] [NEXT PAGE]