Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4095

Page 6
background image

FN 3

Brake Caliper Assembly Overview

‹› After replacing brake pads, press the brake pedal firmly several times with the vehicle stationary so that the brake pads are properly seated in their

normal operating position.

‹› Use the brake charger/bleeder unit (VAS 5234) or extraction device (VAG 1869/4) to extract brake fluid from the brake fluid reservoir.

‹› Before removing the brake caliper or disconnecting the brake hose, the brake pedal actuator (VAG 1869/2) must be inserted (this dissipates

pressure).

 FN3 Caliper, 15 Inch

1

Phillips/Torx screw, 4 Nm

2

Brake disc

‹› Internally vented, 288 mm diameter.

‹› Thickness: 25 mm.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4095

[PREV PAGE] [NEXT PAGE]