Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4109

Page 20
background image

1 - Brake caliper with parking brake cable lever 

‹› Replace brake caliper if leaking at parking brake cable lever.

‹› Pre-bleed brake caliper after repairing. Refer to => [ Brake Caliper Pre-Bleeding ] See: Brake Bleeding/Service and Repair/Brake Caliper

Pre-Bleeding.

2 - Dust cap

3 - Bleeder valve, 10 Nm

‹› Apply a thin coat of assembly paste (G 052 150 A2) to the threads before installing.

4 - Bolt, self locking, 35 Nm

‹› Replace

‹› When loosening and tightening, counter hold at guide pin.

5 - Guide pins

‹› Grease before pulling on protective cap.

6 - Protective cap

‹› Pull onto brake carrier and guide pin.

7 - Brake carrier with guide pins and protective cap

‹› CII 38 brake illustration.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4109

[PREV PAGE] [NEXT PAGE]