Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Brakes and Traction Control > Power Brake Assist > Vacuum Brake Booster > Component Information > Service and Repair > Brake Booster Vacuum Sensor > Page 4202
Vacuum Brake Booster: Service and Repair
Brake Pedal and Brake Booster Separating
Special tools, testers and auxiliary items required
‹› Release tool (T 10159)
Remove the trim on driver's side.
Only on vehicles with brake light switch on mounting bracket:
Disconnect the connector from the brake light switch.
Remove the brake light switch by rotating it 45 degrees to the left.
Continuation for All
Press brake pedal in direction of brake booster and hold.
Insert the release tool (T 10159) and pull in direction of driver seat. When doing this, counter hold on brake pedal. (At this moment the pedal must
For ease of illustration separating the brake pedal from the brake booster is shown with the pedal assembly removed.
Pull the release tool (T 10159) and brake pedal together toward the driver seat. (The brake pedal will thereby be pulled off the ball head of the
Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head engages audibly.
|[PREV PAGE] [NEXT PAGE]|