Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Brakes and Traction Control > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Service and Repair > ABS Mark 70, ABS and ASR > Page 4226
Carefully pull off all sealing rings from the valve domes of the hydraulic unit.
‹› No moisture or particles of dirt must penetrate in interior of control module.
‹› The hydraulic pump must not be separated from the hydraulic unit.
‹› Avoid buildup of static electricity!
Cover control module magnetic coils with a lint free cloth.
After separating the control module and hydraulic unit, use transport protection for the valve body.
Installing the New Control Module
‹› Surface must be cleaned before assembling.
Slide all the sealing rings - A - on slightly over the valve domes.
|[PREV PAGE] [NEXT PAGE]|