Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Cylinder Head Assembly > Valve Cover > Component Information > Service and Repair > Cylinder Head Cover Assembly Overview > Page 1944

Page 2
background image

‹› Lubricate before assembling.

‹› For the cap - item 4 -.

6

Cylinder Head Cover

‹› Removing and installing, refer to => [ Cylinder Head Cover ] See: Cylinder Head Cover.

‹› Replace if damaged.

7

Lifting Eye

8

Bolt

‹› 23 Nm

9

Camshaft Timing Chain

‹› Mark the direction of rotation before removing (installed position). Refer to => [ Timing Chain Marks ] See: Timing Components/Timing

Chain/Service and Repair/Chain Drive Overview.

‹› Installing, refer to => [ Intermediate Shaft and Timing Chains, Installing ] See: Timing Components/Timing Chain/Service and

Repair/Intermediate Shaft and Timing Chains, Installing.

10

Combination Valve

‹› Checking, refer to one of the following:

Engine code BUB, refer to => [ Secondary Air Injection Combination Valve, Checking ] See: Powertrain Management/Emission Control
Systems/Air Injection/Air Injection Control Valve/Service and Repair. 

Engine code CBRA => [ Secondary Air Injection Combination Valves, Checking ] See: Powertrain Management/Emission Control
Systems/Air Injection/Air Injection Vacuum Control Solenoid Valve/Service and Repair.

‹› Removing and installing, refer to one of the following:

Engine code BUB, refer to => [ Combination Valve ] See: Powertrain Management/Emission Control Systems/Air Injection/Service and
Repair. 

Engine code CBRA, refer to => [ Left Combination Valve ] See: Powertrain Management/Emission Control Systems/Air Injection/Service
and Repair or => [ Right Combination Valve ] See: Powertrain Management/Emission Control Systems/Air Injection/Service and Repair.

11

Camshaft Adjustment Valve 1 (N205)

‹› For the intake camshaft.

‹› Removing and installing, refer to => [ Camshaft Adjuster Valves ] See: Actuators and Solenoids - Engine/Variable Valve Timing

Actuator/Service and Repair/Camshaft Adjuster Valves.

‹› Mark the connector belonging to the component before disconnecting. 

12

Camshaft Adjustment Valve 1 (Exhaust) (N318)

‹› For the exhaust camshaft.

‹› Removing and installing, refer to => [ Camshaft Adjuster Valves ] See: Actuators and Solenoids - Engine/Variable Valve Timing

Actuator/Service and Repair/Camshaft Adjuster Valves.

‹› Mark the connector belonging to the component before disconnecting. 

13

O-ring

‹› For the oil passage.

‹› Replace

Engine, Cooling and Exhaust > Engine > Cylinder Head Assembly > Valve Cover > Component Information > Service and Repair > Cylinder Head Cover Assembly Overview > Page 1944

[PREV PAGE] [NEXT PAGE]