Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Drive Belt > Component Information > Service and Repair > Ribbed Belt Pulley Without Freewheel

Page 1
background image

Drive Belt: Service and Repair
Ribbed Belt Pulley Without Freewheel

Ribbed Belt Pulley without Freewheel

Special tools, testers and auxiliary items required

‹› Socket (VAS 3310)

‹› Torque Wrench (V.A.G 1332) 

Removing:

-

Remove generator, refer to => [ Generator ] See: Starting and Charging/Charging System/Alternator/Description and Operation.

-

Tighten the generator in a vise at the mounting points.

-

Use the (VAS 3310) to remove the ribbed belt pulley nut (65 Nm) from the generator shaft.

Installing:

Install in reverse order of removal, noting the following:

-

Tighten all threaded connections to the specification shown in => [ General Tightening Specifications for All Vehicles ] See:
Specifications/Mechanical Specifications/Starting and Charging/System Specifications/General Tightening Specifications For All Vehicles.

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Drive Belt > Component Information > Service and Repair > Ribbed Belt Pulley Without Freewheel

[PREV PAGE] [NEXT PAGE]