Eos (1F7) V6-3.2L (BUB) (2008)
-
Remove the bolt - 1 - for the rear intake manifold support (exhaust side).
-
Disconnect the connecting hose for the crankcase ventilation from the cylinder head cover.
-
Bring the lock carrier into the service position. See: Body and Frame/Lock Carrier
-
Disconnect the vacuum hose from the intake manifold flap vacuum actuator.
Engine Code BUB
-
Remove the oil dipstick guide tube bolt - 1 -.
-
Remove the bolt - 2 - and remove the vacuum reservoir from the intake manifold.
Engine Code CBRA
-
Remove the oil dipstick guide tube bolt - 3 -.
-
Remove the bolt - 4 - and remove the vacuum reservoir - 1 - from the intake manifold.
Continuation for All Engines
-
Remove the intake manifold bolts.
-
Remove the intake manifold and place it on a suitable surface so that the vacuum actuator is not damaged.
‹› Seal the intake passages in the intake manifold and in the cylinder head with clean cloths.
Installing