Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Chain > Component Information > Service and Repair > Camshaft Adjuster With Camshaft Timing Chain, Installing

Page 1
background image

Timing Chain: Service and Repair
Camshaft Adjuster With Camshaft Timing Chain, Installing

Camshaft Adjuster with Camshaft Timing Chain, Installing

‹› A revised camshaft adjuster is being installed as of 12.08. To recognize the new adjuster: starting in 12.08 the exhaust camshaft adjuster 32A has a

plastic cover.

=> [ Vehicles through 11.08 ] 

=> [ Vehicles from 12.08 ] 

Vehicles through 11.08

-

Rotate the crankshaft at the vibration damper bolt in engine rotation direction to the Top Dead Center (TDC) cylinder 1 mark -  arrow -.

-

The camshaft lobes - A - for cylinder 1 must face each other.

-

Install the (T10068 A) into both camshaft grooves. If necessary, slightly rotate the camshaft back and forth using an open end wrench.

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Chain > Component Information > Service and Repair > Camshaft Adjuster With Camshaft Timing Chain, Installing

[PREV PAGE] [NEXT PAGE]