Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Timing Components > Variable Valve Timing > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 2233

Page 7
background image

-

Tighten the M8 bolts - item 8 -=> [ Bolt ] See: Balance Shaft Chain/Service and Repair to 23 Nm and tighten the M6 stud bolt - item 2 -=> [ Stud
Bolt ] See: Balance Shaft Chain/Service and Repair to 8 Nm.

-

Install the chain tensioner for the camshaft timing chain and tighten it to 40 Nm.

-

Rotate the crankshaft twice in engine rotation direction and check the valve timing again.

-

Install the cylinder head cover and the intake manifold. Refer to => [ Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service
and Repair/Cylinder Head Cover.

Vehicles from 12.08

-

Rotate the crankshaft at the vibration damper bolt in engine rotation direction to the Top Dead Center (TDC) cylinder 1 mark -  arrow -.

-

The camshaft lobes - A - for cylinder 1 must face each other.

Engine, Cooling and Exhaust > Engine > Timing Components > Variable Valve Timing > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 2233

[PREV PAGE] [NEXT PAGE]