Eos (1F7) V6-3.2L (BUB) (2008)
Water Pump: Service and Repair
Coolant Pump
Special tools, testers and auxiliary items required
‹› Engine Support Bridge (10 - 222 A)
‹› Shackle (10 - 222 A/12)
‹› Adapter (10 - 222 A/18)
‹› Adapter (10 - 222 A/13)
‹› Bracket with Spindle and Hook (10 - 222 A/10)
‹› Refractometer (T10007)
‹› Drip Tray for VAS 6100 (VAS 6208)
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Torque Wrench (40-200 Nm) (V.A.G 1332)
‹› Spring Type Clip Pliers (VAS 5024 A)
Removing
-
Drain the coolant. Refer to => [ Draining and Filling ] See: Cooling System/Service and Repair/Procedures/Draining and Filling.
-
Remove right front sections of the wheel housing liners..
-
Remove the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed
Belt.
-
Install the (10 - 222A) with the (10 - 222 A/10), (10 - 222A/12), (10 - 222 A/13) and (10 - 222 A/18) as shown and support the engine in the
installed position at the right lift eye.