Eos (1F7) V6-3.2L (BUB) (2008)
Blower Motor Resistor: Service and Repair
Fresh Air Blower Series Resistor with Fuse
Removing
CAUTION!
Contact with a hot exhaust system can cause severe burns.
Fresh Air Blower Series Resistor With Fuse (N24 ) may be hot.
Let Fresh Air Blower Series Resistor With Fuse ( N24) cool off before removing.
-
Remove partition from heating unit. Refer to => [ Fresh Air Blower ] See: Blower Motor/Service and Repair/Fresh Air Blower
-
Disconnect harness connector - 1 - from Fresh Air Blower Series Resistor With Fuse (N24).
-
Press catch in direction of - arrow - and remove Fresh Air Blower Series Resistor With Fuse (N24) from heating unit.
Installing
Install in reverse order of removal.