Eos (1F7) V6-3.2L (BUB) (2008)
-
Disengage catches in - direction of arrow - and pull thermo-fuses - 1 - out of mounts.
-
Release retaining tab - 1 - in - direction of arrow A - and pull off mount from relay carrier in - direction of arrow C -.
-
Release retaining tab - 2 - in - direction of arrow B - and pull off mount from relay carrier in - direction of arrow C -.
-
Release retainer - 1 - for relay panel in direction of - arrow - and remove relay panel.
Installing
Install in reverse order of removal, noting the following:
-
First clip connector (for relay), holder (for fuse) and mounts (for thermo-fuses) into relay carrier.
-
Place relay carrier - 2 - into guide - 1 - and then engage relay carrier.