Eos (1F7) V6-3.2L (BUB) (2008)
Fuel Filter: Service and Repair
Special tools, testers and auxiliary items required
‹› Fuel Container
Observe the safety precautions. Refer to => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Observe the rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Clean Working Conditions.
Place the container underneath the fuel filter.
The fuel system is under pressure! Wear protective goggles and protective clothing to prevent injuries and contact with skin. Before
disconnecting the connection, wrap a cloth around the connection. Then release pressure by carefully disconnecting the connection.
Disconnect fuel lines - 1, 2 and 3 - by pressing the release buttons.
Remove the bolt - 4 -.
Remove the fuel filter.
Installation is performed in the reverse order of removal, noting the following:
The direction of flow is marked on the filter housing with a arrow.
Bleed the fuel supply system. Refer to => [ Fuel System, Bleeding ] See: Powertrain Management/Fuel Delivery and Air Induction/Service and