Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Maintenance > Wheels and Tires > Tires > Component Information > Service and Repair > Matched Mounting > Page 1725

Page 2
background image

Tires, Dismounting

CAUTION!
‹› Note the safety precautions. Refer to => [ Safety Precautions for Run-Flat Tires, Removing and Mounting ] See: Service

Precautions/Safety Precautions For Run-Flat Tires, Removing and Mounting.

-

Turn wheel on tire mounting device so that tire valve/tire pressure sensor - 2 - stands in front of mounting head - 1 -. 

CAUTION!
Mounting head - 1
 - must not be located in area -  a - of tire valve/tire pressure sensor, otherwise the mounting head will damage the tire pressure
sensor.

-

Position mounting head - 1 - in vicinity of tire valve/tire pressure sensor so that tire iron can be put on approximately 30° next to tire valve/tire
pressure sensor - 2 -.

-

Install press holders - 3 - on disc wheel opposite the mounting head - 1 -.

-

Now pry tire bead over mounting finger on mounting head using tire iron and remove tire iron again.

-

Let the tire dismounting/mounting machine run clockwise until upper bead lies completely above the rim flange.

Maintenance > Wheels and Tires > Tires > Component Information > Service and Repair > Matched Mounting > Page 1725

[PREV PAGE] [NEXT PAGE]