Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Power and Ground Distribution > Wiring Harness > Component Information > Service and Repair > Procedures > Page 5022

Page 8
background image

  ‹› If, by cutting out the damaged wire section, both ends of the vehicle-specific single wire are too short for a repair using a single crimp connection,

insert a repair wire section of matching length with two crimp connections. Refer to => [ Wire Break with Dual Repair Point ] See: Wire Break
With Dual Repair Point.

-

Strip wire ends using 6 - 7 mm wire stripper.

-

Slide crimp connection onto both stripped wire ends of vehicle-specific single wire and crimp them using crimp pliers.

  ‹› Always be sure to use the correct crimping slot for the crimping connection used. Refer to => [ Crimping Pliers with Insert ] See: Description and

Operation/Crimping Pliers With Insert.

Power and Ground Distribution > Wiring Harness > Component Information > Service and Repair > Procedures > Page 5022

[PREV PAGE] [NEXT PAGE]