Eos (1F7) V6-3.2L (BUB) (2008)
Remove nuts - arrows - (4.5 Nm).
Remove bracket with comfort system central control module - 1 -.
Pull retaining tab - 1 - in - direction of arrow B - and slide comfort system central control module - 2 - out of bracket - 3 - in - direction of
arrow A -.
Install in reverse order of removal, noting the following:
Tighten the nuts to tightening specification. Refer to => [ Comfort System Central Control Module Tightening Specifications ] See: Specifications.
‹› The connectors can only be connected and locked when the recesses - arrows - of the connectors and bracket line up exactly.