Eos (1F7) V6-3.2L (BUB) (2008)
Repairs and Inspections Required After a Collision: Testing and Inspection
Belt Latch Function, Checking
Check the safety belt latch:
Insert locking tongue into the safety belt latch until it audibly engages. Check whether locking mechanism is properly engaged by giving belt
webbing a firm jerk.
‹› If locking tongue fails to engage properly into the safety belt latch even once during at least 5 tests, replace complete seat belt with safety belt
Check release mechanism:
Press the safety belt latch to release the safety belt.
When belt is slack, locking tongue must spring out of safety belt latch on its own.
‹› Perform test at least 5 times. If locking tongue fails even once to spring out, replace complete seat belt with safety belt latch.
Under no circumstances may grease be used to eliminate noise or stiffness at belt buckle buttons.