Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Procedures > Page 1173

Page 11
background image

-

Disconnect side airbag connector - 8 -.

-

Remove cable bracket - 9 -.

-

If present, disconnect front backrest heating connector -  10 - and remove yellow connector.

‹› Do not remove white bracket.

-

Remove cable bracket - 11 -.

-

Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seats

-

Remove cover from upholstery of front seat cushion (front seat cushion is not removed). Refer to => [ Front Seat Pan Covers and Upholstery ] 
See: Body and Frame/Seats/Service and Repair/Overhaul/Seats - Upholstery, Covers/Front Seat Covers and Upholstery.

CAUTION!
Do not disconnect connector from Seat Occupied Recognition Control Module (J706).

-

Unclip pressure hose - 6 - from retainers.

-

Unclip Seat Occupied Recognition Pressure Sensor (G452) - 5 - from retainer, when doing this do not disconnect harness connectors - 3 - or - 4 -
at Seat Occupied Recognition Pressure Sensor (G452) and similarly at Seat Occupied Recognition Control Module ( J706) - 2 -.

-

Remove bolts - 1 - (1.5 Nm).

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Procedures > Page 1173

[PREV PAGE] [NEXT PAGE]