Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Suspension > Acceleration Sensor, Suspension Control > Component Information > Service and Repair > Left Front Body Acceleration Sensor > Page 1217
The tab on the retainer - 1 - must fit into the recess in the left front body acceleration sensor - arrow -.
‹› Be sure to use the correct retainer. An "L" is stamped on the retainer.
Right Front Body Acceleration Sensor ( G342)
Attach the front right body acceleration sensor to the retainer.
Be sure to pay attention to the installation position of the right front body acceleration sensor retainer.
The tab on the retainer - 1 - must fit into the recess in the right front body acceleration sensor - arrow -.
‹› Be sure to use the correct retainer. An "R" is stamped on the retainer.
Continuation for Both Sides
Remove the adhesive on the sealing surfaces of the retainer and apply two-sided adhesive tape.
Using an dia. 11 mm drill, secure the retainer and the ( VW 222 A).
|[PREV PAGE] [NEXT PAGE]|