Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Starting and Charging > Power and Ground Distribution > Safety Circuit Breaker > Component Information > Service and Repair > Procedures > Page 4646

Page 2
background image

-

Disengage harness connector - 1 - by pulling locking button - 3 - in - direction of arrow -.

-

Remove connector - 1 - in - direction of arrow  - and remove Battery Interrupt Igniter - 2 - from vehicle.

Installing:

Install in reverse order of removal, noting the following:

‹› When installing connector on Battery Interrupt Igniter, ensure connector retainer engages audibly.

-

Tighten all threaded connections to specified torque shown in => [ Main Fuse Box Tightening Specifications ] See: Fuse
Block/Specifications/Main Fuse Box Tightening Specifications.

-

Reconnect battery, refer to => [ Disconnecting and Connecting Batteries In Luggage Compartment ] See: Battery/Service and Repair/Removal and
Replacement/Disconnecting and Connecting Batteries In Luggage Compartment. 

Starting and Charging > Power and Ground Distribution > Safety Circuit Breaker > Component Information > Service and Repair > Procedures > Page 4646

[PREV PAGE] [NEXT PAGE]