Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Starting and Charging > Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 4677
Push release tool through until it stops by gently lifting - arrow -.
Contact is ejected from the terminal housing.
Missing protection leads to the electrical system damage.
‹› All threaded connections must be tightened to the specified torque.
‹› When applying protection, always use the accompanying hose on the protection container.
‹› Protection wax is used in the cool area.
‹› Cavity protection wax is used in the warm area.
‹› The protection material draws itself into the affected places by capillary action.
Hold the injector under the wiring eyelet and spray all around the pins.
Hold the injector above the wiring eyelet and spray all around the pins and wiring eyelet.
|[PREV PAGE] [NEXT PAGE]|