Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Steering and Suspension > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Column Control Module > Component Information > Service and Repair > Steering Column Electronic Control Module > Page 5080
Carefully pull steering column electronic systems control module downward from steering column switches.
‹› Check whether all harness connectors are disconnected on the upper side, disconnect if necessary.
Disengage - arrow A - harness connector - 1 - and disconnect it from steering column electronic systems control module.
Remove securing latch - 3 - from harness connector.
Disengage lock - arrow B - on electrical connection - 2 - and disconnect from steering column electronic systems control module.
Install in reverse order of removal, noting the following:
‹› Make sure the pins are not bent and that the connector audibly engages.
|[PREV PAGE] [NEXT PAGE]|