Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1535002.png)
-
Remove coupling rod from stabilizer bar.
-
Remove pendulum support from transmission, unscrew bolts - 14 - to do so.
-
Locate subframe. Refer to => [ Subframe and Consoles, Securing ] See: Subframe/Front Subframe/Service and Repair/Procedures/Front
Suspension.
-
Now remove the bolts for:
‹› Steering gear - 3 - and - 6 -.
‹› Stabilizer - 11 - and - 16 -.
‹› Subframe - 4 - and - 5 -.
Installing
Installation is performed in the reverse sequence.
-
Install the noise insulation.
Tightening Specifications
