Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1542001.png)
Rear Knuckle: Removal and Replacement
Wheel Bearing Housing Bonded Rubber Bushing
Wheel Bearing Housing Bonded Rubber Bushing (Eos)
Special tools, testers and auxiliary items required
^
Assembly tool 3346
^
Assembly tool 3350
^
Fitting sleeve 3378
^
Tappet 3390
^
Torque Wrench V.A.G. 1332
Removing
^
Remove wheel.
^
Remove coil spring.
^
Remove wheel bearing/wheel hub unit.
^
Remove cover plate.
^
Remove bolt - arrow - for lower transverse link - 1 -.
Pressing out bonded rubber bushing
^
Attach tools as depicted in illustration.
1. Nut 3346/3
2. Tappet 3390
3. Sleeve 3350
4. Nut, commercially available
5. Spindle 3346/2
^
Remove bonded rubber bushing by turning spindle.
Installing
Pull in bonded rubber bushing
