Eos (1F7) V6-3.2L (BUB) (2008)
From MY 2008, Heli-Coil inserts are installed in the threads for the pendulum support threaded connection in the 02Q manual
transmissions.
On these and all other transmissions, use strength class 10.9 bolts.
If, in the 02Q manual transmissions, there is not Heli-Coil insert, then use 8.8 strength class bolts and the appropriate tightening
specification.
‹› Always replace after removal.
21
Bolt
‹› Pay attention to the bolt strength class. There are different tightening specifications.
‹› M10 x 35 strength class 8.8: 40 Nm + 90° turn.
‹› M10 x 35 strength class 10.9: 50 Nm + 90° turn.
CAUTION!
From MY 2008, Heli-Coil inserts are installed in the threads for the pendulum support threaded connection in the 02Q manual
transmissions.
On these and all other transmissions, use strength class 10.9 bolts.
If, in the 02Q manual transmissions, there is not Heli-Coil insert, then use 8.8 strength class bolts and the appropriate tightening
specification.
‹› Always replace after removal.
22
Pendulum Support
‹› Bolt first to transmission, then to subframe.
‹› Various versions.
23
Retainer Plate
24
Lower Bonded Rubber Bushing for Pendulum Support
‹› Ejecting and pressing in, refer to => [ Subframe Bonded Rubber Bushings ] See: Subframe/Front Subframe Mount/Service and Repair.
‹› Various versions.
25
Shield
26
Bolt
‹› 6 Nm
‹› Self-tapping.
27
Subframe
‹› Removing and installing, without steering gear, refer to => [ Subframe, without Steering Gear ] See: Subframe/Front Subframe/Service and
Repair/Removal and Replacement/Subframe, Without Steering Gear.
‹› Removing and installing, with steering gear, refer to => [ Subframe, with Steering Gear ] See: Cross-Member/Front Cross-Member/Service
and Repair/Subframe, With Steering Gear.
‹› Various versions.
28
Upper Bonded Rubber Bushing for Pendulum Support
‹› Ejecting and pressing in, refer to => [ Subframe Bonded Rubber Bushings ] See: Subframe/Front Subframe Mount/Service and Repair.
‹› Various versions.