Eos (1F7) V6-3.2L (BUB) (2008)
Front Subframe: Procedures
Subframe and Consoles, Securing
Special tools, testers and auxiliary items required
‹› Locating pins (T10096)
‹› Engine/transmission jack (V.A.G 1383 A)
To secure the subframe with the brackets, (T10096) must be installed in positions - 1 -, - 8 -, - 9 - and - 18 -, one after the other.
‹› (T10096) may only be tightened to a maximum of 20 Nm, since otherwise the threads of the locating bolts will be damaged.
Replace the bolts of the mounting bracket one after the other on both sides using (T10096) and tighten them to 20 Nm.
Securing Mounting Bracket