Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Steering and Suspension > Suspension > Suspension Control ( Automatic - Electronic ) > Ride Height Sensor, Suspension Control > Component Information > Service and Repair > Procedures > Page 5692

Page 4
background image

Front Level Control System Sensor Assembly Overview

Front Level Control System Sensor Assembly Overview

‹› A replacement front left and right level control system sensor (G78/G289) comes complete with the coupling rod and the upper and lower

retaining plate.

‹› Replace with subframe installed.

1

Subframe

2

Bolt

‹› M6 x 16

‹› 9 Nm

3

Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)

‹› Complete with components.

‹› Lever - arrow - must point toward vehicle exterior. 

‹› Removing and installing, refer to => [ Front Level Control System Sensor ] See: Front Level Control System Sensor. 

‹› If the left front level control system sensor and the right front level control sensor were removed and installed, then a basic setting to the

adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] See: Testing and Inspection/Programming and
Relearning.

‹› After replacing, perform basic setting of the headlamps via the Guided Fault Finding function with the Vehicle Diagnosis, Testing, and

Steering and Suspension > Suspension > Suspension Control ( Automatic - Electronic ) > Ride Height Sensor, Suspension Control > Component Information > Service and Repair > Procedures > Page 5692

[PREV PAGE] [NEXT PAGE]