Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Steering and Suspension > Suspension > Suspension Strut / Shock Absorber > Component Information > Service and Repair > Removal and Replacement > Page 5721

Page 2
background image

^

Secure engine/transmission jack V.A.G. 1383 A with Wheel Hub Support T10149 to wheel hub using one wheel bolt.

CAUTION!
^

Do not lift or lower vehicle when the engine/transmission jack V.A.G. 1383 A stands below the vehicle. Vehicle could slip off lift.

^

Do not leave engine/transmission jack V.A.G. 1383 A below vehicle any longer than necessary.

^

Separate wheel bearing housing/suspension strut bolt connection - arrow -.

^

Insert spreader 3424 into wheel bearing housing slot.

^

Turn ratchet around 90 degree and remove from spreader 3424.

^

Press brake disc in direction of suspension strut by hand.

Otherwise strut tube may be canted in hole of wheel bearing housing.
^

Pull wheel bearing housing downward off strut tube and lower using engine/transmission jack V.A.G. 1383 A until strut tube hangs free.

^

Tie wheel bearing housing onto bracket/subframe using wire.

^

Remove engine/transmission jack V.A.G. 1383 A under wheel bearing housing.

CAUTION!
^

Do not leave engine/transmission jack V.A.G. 1383 A below vehicle any longer than necessary.

^

Remove wiper arms.

^

Remove plenum chamber cover.

Steering and Suspension > Suspension > Suspension Strut / Shock Absorber > Component Information > Service and Repair > Removal and Replacement > Page 5721

[PREV PAGE] [NEXT PAGE]