Eos (1F7) V6-3.2L (BUB) (2008)
The tab - arrow - is used for adjusting the rear body acceleration sensor retainer.
Continuation for Both Sides
-
Install the shock absorber and tighten the bolts.
-
Tighten bolt - arrow -.
-
Connect the connector to the left and right rear dampening adjustment valve (N338/N339).
-
Install coil spring. Refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal and Replacement/Coil Spring.
For the Left Shock Absorber Only
-
Connect the left rear level control system sensor to lower transverse link.
Continuation for Both Sides
-
Install wheel housing liner.
-
Install wheel and tighten. Refer to => [ Wheel Bolt Tightening Specification ] See: Wheels and Tires/Wheel Fastener/Specifications.
Tightening Specifications
Shock Absorber
Shock Absorber
‹› Adaptive chassis DCC shock absorber, removing and installing, refer to => [ Shock Absorber ] See: Shock Absorber, Self-Leveling Suspension.
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)