Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Steering and Suspension > Wheels and Tires > Wheels > Component Information > Service and Repair > Wheel Mounting, Protecting against Corrosion > Page 5820
Wheels: Service and Repair
Coat the wheel centering seat with corrosion protection. Refer to => [ Wheel Centering Seat, Protecting against Corrosion ] See: Wheel Centering
1. When mounting a wheel, tighten all wheel bolts uniformly by hand.
2. Tighten the wheel bolts diagonally to 30 Nm.
3. Lower the vehicle to the floor and tighten diagonally all the wheel bolts with the wrench to the specified wheel bolt tightening specification. Refer
to => [ Wheel Bolt Tightening Specification ] See: Wheel Fastener/Specifications.
|[PREV PAGE] [NEXT PAGE]|