Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Transmission and Drivetrain > Manual Transmission/Transaxle > Differential, Manual Transaxle > Differential Output Shaft, M/T > Component Information > Service and Repair > Flange Shaft Assembly Overview > Page 3709

Page 3
background image

-

Install the flange shaft.

-

Install the flange shaft bolt and tighten it to 30 Nm.

-

Instal the ball joint to lower control arm bolts/nuts to the old impressions.

-

Install the left drive axle to the flange shaft.

-

Install the left front wheel housing liner.

-

Install the left wheel.

-

Change the Direct Shift Gearbox (DSG) oil. Refer to => [ Oil Filter, Changing and Oil Level, Adjusting ] See: Automatic
Transmission/Transaxle/Fluid Filter - A/T/Service and Repair/Oil Filter, Changing and Oil Level, Adjusting.

-

Install the noise insulation.

Transmission and Drivetrain > Manual Transmission/Transaxle > Differential, Manual Transaxle > Differential Output Shaft, M/T > Component Information > Service and Repair > Flange Shaft Assembly Overview > Page 3709

[PREV PAGE] [NEXT PAGE]