Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Transmission and Drivetrain > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Speed Sensor, A/T > Component Information > Locations > Page 3840
Transmission Speed Sensor: Service and Repair
Transmission Input Speed and Clutch Oil Temperature Sensors
Both sensors are combined into one component and can only be replaced together. They are coated with oil in transmission near multi plate clutch.
Often, the sensor cable is pulled. This damages it. If cable was pulled, sensor must be replaced.
Remove DSG mechatronic. Refer to => [ Mechatronic, with Transmission Installed ] See: Automatic Transmission/Transaxle/Service and
Remove screw and carefully pry out sensor with screwdriver or pliers.
Only install old sensor if it is certain that:
‹› Sensor functions properly.
‹› Sensor wire was not pulled during removal.
Otherwise, install a NEW sensor.
Insert sensor coated with DSG oil.
Tighten screw to 10 Nm.
Install DSG mechatronic. Refer to => [ Mechatronic, with Transmission Installed ] See: Automatic Transmission/Transaxle/Service and
|[PREV PAGE] [NEXT PAGE]|