Eurovan Sliding Door Window Glass Retrofitting - Service and Repair
_can/Page-898001.png)
Sliding Door Window Glass: Service and Repair
Sliding Window, Retrofitting
Sliding Window, Retrofitting
NOTE:
-
In some versions, sliding windows can be installed instead of flush-bonded windows in the sliding door, side panel of transporter and/or double
cab, and side door of double cab
-
The installation description is given for only one side. Directions for other side are mirror image
-
Depending on equipment, remove trim and seats or seat benches.
-
Remove flush bonded window.
-
Cut back remainder of adhesive sealing material.
Transferring appropriate measurements to window molding and setting corner points:
Sliding door
Side panel.
Side door (double cab)
Side panel (double cab).
-
Drill holes 7.5 mm dia (0.30 in.) and deburr.
-
If necessary, rework holes with a round file to fit the sliding window.
NOTE: Refer to EuroVan Body Collision Repair Manual for paint repair and corrosion protection.
-
After completion of the painting/corrosion protection, install sliding window.
