Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
Trunk / Liftgate Shock / Support: Procedures
Gas Strut, Discarding
-
Clamp gas strut into vice in the area x = 50 mm.
NOTE: After replacing gas strut, gas should be released from removed part before discarding.
WARNING:
-
Never squeeze strut in vise in area other than shown. To do so can cause strut caps on either end to pop off and release spring, which
is under high pressure.
-
Use protective eye wear.
NOTE:
-
Cut strut cylinder open in first third of cylinder length, starting from reference edge on piston side.
-
Cover area being cut with rag to catch oil.
-
Dispose of oil and rags according to applicable regulations.