Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
11
-
Banjo bolt
12
-
Clamp
-
Expand to install molded trim
13
-
Molded trim panel
-
Removing:
-
Press trim -16- up and unhook
-
Remove Phillips screws -15- and unhook strap
-
Pryout expanding pins -4-, unclip left frame trim -3-, right frame trim -1-.
-
Remove screws -10-.
-
Pull molded trim out slightly from tailgate in lower area and press upward out of clamps -12-.
-
Expand clamps -12-.
-
After installing molded trim, pull auxiliary wedges out of clamp -12-
14
-
Strap
-
Removing: Remove Phillips screws -15- unhook strap from mounting hole.
15
-
Phillips screw
-
Two- piece
16
-
Trim
-
Press upward, unhook to remove
Clamps, expanding
-
Expand clamps -1- with shop made auxiliary wedges -2- (wood or plastic).
-
Install molded trim -3-.
-
Pull out auxiliary wedges -2- or, when molded trim is installed, auxiliary wedges will fall out by themselves.