Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
5
-
Recessed screw
6
-
Spreader nut
7
-
Bracket
8
-
Press-stud
-
Only screwed onto trim
9
-
Clip
-
2 - part
-
When mounting, insert sleeve into mounting hole in B-pillar and pin into trim.
10
-
Side panel molded trim, front
11
-
Seal
-
After mounting trim, ensure that seal is positioned correctly.
Upper B-pillar trim left, removing
-
Pry off cap - 1 -, remove belt assembly bolt.
-
Pry out cap - 2 -, remove coat hook.
-
Unclip trim in following order:
-
Along molded headliner - arrow A -
-
Rear side of B-pillar - arrow B -
-
Front side of B-pillar - arrow C -
-
At level of clip - 1 -, remove trim in installation position of B-pillar.
Upper B-pillar trim left, installing