volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Wheel Hub|Service and Repair|Page 800
Page 3
background image

3. Remove link rod bolt, then caliper and secure away with wire.
4. Remove brake disc and splash shield.
5. Press tie rod off steering arm, then remove bolts securing wheel bearing housing/lower ball joint.
6. Mark position of eccentric bushing to wheel bearing housing.
7. Separate wheel bearing housing/upper ball joint, then remove wheel bearing housing.
8. Reverse procedure to install.

Engine, Cooling and Exhaust > < Wheel Hub|Service and Repair|Page 800