Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor (VSS) -G54-, Installing
Vehicle Speed Sensor (VSS) -G54-, Installing
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio.
NOTE:
-
Some systems in the vehicle require a speed signal (instrument cluster, 28 pin multi-pin connector, contact 7).
-
On vehicles with a mechanical speedometer the speed sensor is bolted to the rear side of the instrument and delivers 4 impulses per drive cable
revolution. An inductive sensor (2-pin) or crankshaft position sensor (3-pin) is used for radios with Gala 1994 >.
-
On reverse side of instrument cluster, carefully break part -A- off along perforated line.
-
Insert the speed sensor -1- into the resulting recess and secure with Philips screws -3-.