Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
Steering Column Lock: Service and Repair
Steering Lock Housing, Removing and Installing
Steering Lock Housing, Removing And Installing
Removing
-
Remove steering column switches.
-
Drill out steering lock housing securing bolts.
-
Pull lock washer and spring off steering column.
NOTE: Pull steering column down and away after removing the lock washer.
-
Remove steering lock housing from column tube and steering column.
Installing
NOTE: Installation of the steering lock housing can only be undertaken when the steering column has been removed
-
Place column tube in vice ensuring that the universal joint -a- is supported on the vice.
-
Secure column in vice.
-
Place steering lock housing on column tube.
-
Push steering lock housing onto the column tube until dimension -a- is attained.
a = 95 mm (3.7 in.)
-
Tighten steering lock housing shear bolt until the head shears off.
-
Slide spring and lock washer on steering column.