Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
Shift Interlock Cable: Adjustments
Locking Cable - Adjusting
Note: Locking cable must only be adjusted in its installation position.
Automatic Trans Selector Lever Locking Cable Adjustment
1. Selector lever in "P" position.
2. Switch ignition/starter switch "OFF".
3. Loosen locking cable nuts -1- and -2- at frame.
4. Push locking lever -arrow- until it touches selector lever
5. Secure locking cable in this position on frame.
6. Carry out functional check.