Eurovan L5-2369cc 2.4L DSL SOHC (AAB) Can (1993)
CAUTION:
-
Tape around window opening with cloth or fabric tape to prevent damage to paint when removing/ installing glass with electric cutter.
-
Protect body and interior from glass splinters.
-
Pull molding out all around.
-
Remove glass pieces down to adhesive sealing compound.
-
Cut off adhesive sealing compound - 1 - (with glass residue) using electric cutting tool VAG 1561 ,or equivalent, and knife blade VAG 1561/9
(with stop roller).
-
If necessary, separate adhesive in corners with utility knife.
Window Installation, Preparations
Window Installation, Preparations
Unbroken window
NOTE:
-
When an unbroken window is reused, cut back remaining adhesive material to 1 to 2 mm (1/32 to 5/64 in.) before re-gluing (with electric cutting
tool and scraping knife VAG 1561/8).
-
Remaining material serves as adhesive base for new adhesive
CAUTION: Do not prime or activate adhesive surface or treat it with cleaning solution. Keep adhesive surface dirt and grease free.
Exception: If gluing will not take place immediately after cutting back, remaining residual material must be activated with activator AMV 181 800 02
or equivalent.
-
Install molding on window.