volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5187 > < Initial Inspection and Diagnostic Overview|Page 5185
Page 3
background image

Factory Installed Radio Units

Control Module (Radio System) Version, Coding (Function 07)

Various standard or optional radio systems are installed from 1992 model year. Coding can only be performed on radio systems with On Board
Diagnostic (OBD) capabilities("Premium IV" radios systems installed from 08.98).

Use this function to code the radio with the various model, radio system and equipment variations available .

Coding

-

Connect VAG 1551 Scan Tool (ST), input address word 56 "Radio" and then press -> button, until "Select function XX" is shown in display.

Indicated on display (select function):

Rapid data transfer

HELP

Select function XX

-

Press buttons -0- and -7- to select function 07 "Code control module".

-

Press -Q- button to confirm input.

Indicated on display:

Coding control module
Enter code number XXXXX

(0-32000)

-

Confirm applicable model, radio system and equipment particulars.

-

Using the above information, determine and enter code number from code table.

Code Table

Initial Inspection and Diagnostic Overview|Page 5187 > < Initial Inspection and Diagnostic Overview|Page 5185