Eurovan V6-2.8L (AXK) (2001)
Front Cross-Member: Service and Repair
Unit Support (Subframe)
Special Tools and Equipment
^
VAG 1383A engine/transmission hoist
^
VAG 1712 front axle support
Removing
^
Remove noise insulation pan.
^
Remove front wheels.
^
Remove brake caliper and hang on body using tie wire.
^
Disconnect harness connector for ABS sensor wires.
^
Remove fuel tank
^
Unclip wire (arrow) for oxygen sensor at bracket.
^
Separate exhaust system behind front exhaust pipe -1-.
^
Remove heat shield -2- for exhaust system, loosen exhaust system if necessary.
^
Relieve torsion bar, refer to Torsion Bar.
^
Remove bolt for drive axle at steering gear and remove wires from power steering gear if necessary.
^
Disconnect drive axles from final drive.