Eurovan V6-2.8L (AXK) (2001)
Sunroof / Moonroof Motor: Procedures
Drive Motor (0 Position), Checking
If drive motor is replaced, it must be installed in 0 position (glass panel for sunroof closed).
-
Connect plug connector for drive motor wiring harness.
-
Operate switch - 1 - and count revolutions of drive gear - 2 -: 0 position of drive motor lies between the end shut off points - A - and - B -. End
shut off point - B - is reached by turning gear right and end shut off point - A - by turning left.
-
- A - End shut off point. Raise panel function = 3 revolutions to 0 position.
-
- B - End shut off point. Panel sliding function = 17 revolutions to 0 position.