Eurovan V6-2.8L (AXK) (2001)
-
Remove seal using wedge 3409.
NOTE:
^
When removing the seal make sure that the surface of the cylinder is not damaged.
^
The surfaces of the piston and the seal must only be cleaned with methylated spirits and. then dried.
Installation
-
Thinly coat piston and seal with assembly lubricant G 052 150 A2 before installing.
-
Place protective seal with outer sealing lip on piston.
-
Insert inner sealing lip into cylinder groove.
NOTE: Hold piston in front of caliper housing while inserting sealing lip.
-
Press piston into brake caliper housing using piston resetting tool.
NOTE: The protective seal outer sealing lip will then locate in the piston groove.
Replacement