Eurovan V6-2.8L (AXK) (2001)
Thermostat Housing: Service and Repair
Thermostat housing, disassembling and assembling
1. O-ring
Replace if damaged
2. Retaining clip
Check for secure fitting
3. Thermostat housing
4. Bolt: Tighten to 10 Nm
5. Coolant thermostat
Note installed position
Checking: Warm thermostat in hot water bath.
Starts opening at: approximately 80 ° C
Ends at: approximately 105 ° C
Opens at least 7 mm
6. Connecting piece
7. Seal
Always replace