Eurovan V6-2.8L (AXK) (2001)
Indicated on display:
-
Press buttons -0- and -8- to select "Read Measuring Value Block" function 08. Press -Q- button to confirm input.
If specified value is not obtained:
-
Check connector of Camshaft Position (CMP) sensor -G40- and Camshaft Position (CMP) sensor 2 -G163-, they may have been swapped.
-
Check oil pressure
If no malfunction is detected:
-
Replace intake camshaft adjuster.
Indicated on display:
-
Press buttons 2, 1, and 0 for "Display Group No. 210", and then press Q to exit from input mode.
Display Group No. 210 (Part 1 of 2)
Display Group No. 210 (Part 2 of 2)
Indicated on display: (1 to 4 = display fields)
If specified value is obtained: