Eurovan V6-2.8L (AXK) (2001)
Cylinder Head Gasket: Service and Repair
Preparing cylinder head gasket for installation
Special tools and equipment
-
Sealant AMV 188 001 02
-
Clean 3 mm holes in cylinder head gasket, removing old sealant (arrows)
-
Fill 3 mm holes in cylinder head gasket with sealant AMV 188 001 02 and coat sealing surfaces at cover piece and sealing flange with Sealant.
Note:
-
With the cylinder head installed, the holes in cylinder head gasket are only half visible.