Eurovan V6-2.8L (AXK) (2001)
Heater Core Case: Service and Repair
Heating and Ventilation System Servicing (Front)
Heating Unit, Removing
Heating Unit, Removing
Heating unit removal shown with instrument panel removed.
1
-
Heating unit
2
-
Rubber grommet
3
-
Combination screw
WARNING!
Cooling system is pressurized when engine is warm. Before performing repairs, wear gloves, goggles and other appropriate protection while
slowly and carefully releasing system pressure.
Removing:
-
Remove dust and pollen filter
-
Remove air intake duct (on bulkhead)
-
Clamp coolant (heater) hoses near bulkhead.
-
Remove right air duct.
-
Remove complete instrument panel, passenger side airbag and associated trim
-
Remove bolts -3-.
NOTE: Lower bolt is located on bulkhead under engine compartment cladding.
-
Remove coolant hoses from heater core and plug heater core connections.
-
Remove heater unit.
Heating Unit, Assembly
Heating Unit, Assembly
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti- theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Repair Manual and/or Owner's Manual.